Download or read book Continuous Prestressed Concrete Girder Bridges written by Mary Beth Deisz Hueste and published by . This book was released on 2016 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Texas Department of Transportation designs typical highway bridge structures as simple span systems using standard precast, pretensioned girders. Spans are limited to about 150 ft due to weight and length restrictions on transporting the precast girder units from the prestressing plant to the bridge site. Such bridge construction, while economical from an initial cost point of view, may become somewhat limiting when longer spans are needed. This project focused on developing additional economical design alternatives for longer span bridges with main spans ranging from 150-300 ft, using continuous precast, prestressed concrete bridge structures with in-span splices. Phase 1 of this study focused on evaluating the current state-of-the-art and practice relevant to continuous precast concrete girder bridges and recommending suitable continuity connections for typical Texas bridge girders; the findings are documented in the Volume 1 project report. This report summarizes Phase 2 of the research including detailed design examples for shored and partially shored construction, results of a parametric design study, and results of an experimental program that tested a full-scale girder containing three splice connections. The parametric design study indicated that for bridges spanning from 150-300 ft, continuous precast, prestressed concrete girder bridges with in-span splices can provide an economical alternative to steel girder bridges and segmental concrete box girder construction. The tested splice connections performed well under service level loads. However, the lack of continuity of the pretensioning through the splice connection region had a significant impact on the behavior at higher loads approaching ultimate conditions. Improved connection behavior at ultimate conditions is expected through enhanced connection details. Recommendations for design of continuous spliced precast girders, along with several detailing suggestions are discussed in the report.