Download or read book Repair, Evaluation, Maintenance, and Rehabilitation Research Program Overlays on Horizontal Concrete Surfaces: Case Histories written by and published by . This book was released on 1994 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study documents the current practices for overlaying horizontal concrete surfaces as a first phase in the development of performance criteria for concrete overlays. The case histories presented were typically for overlays completed within the last 10 years and located at Corps of Engineers civil works projects. Overlays documented included bonded conventional, low-slump, fly-ash, silica-fume, polymer-modified, and fiber-reinforced concretes. Unbonded overlays were also documented. Although the information obtained for each case history varied and was sometimes limited, an attempt was made to provide the following basic information for each repair: (a) project description, (b) cause and extent of damage, (c) description of repair materials and procedures, (d) cost, and (e) performance of repair. The extension of service life resulting from using one type of overlay in lieu of another was not evident in the case histories examined, with the exception of where fiber-reinforced concrete was used to resist abrasion erosion (repair failed). Shrinkage and reflective cracks that develop in polymer-modified concrete overlays and overlays containing polypropylene fibers are more likely to be smaller in width and length than those of similiar cracks in conventional and low-slump concrete overlays. Cracks in concretes containing fibers are generally smallest.