Download or read book Study on Specifics of Thermalhydraulics and Neutronics of Pressure-channel Supercritical Water-cooled Reactors (SCWRs). written by Wargha Peiman and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A group of countries has initiated an international collaboration to develop a next generation (i.e., Generation IV) of nuclear reactors. Chosen as one of the six Generation-IV nuclear-reactor concepts, the SCWRs are expected to have high thermal efficiencies within the range of 40 - 50% owing to reactor's high outlet temperatures. The Canadian pressure-tube-type SCWR is featured with 3-batch refueling, 336 vertical fuel channels, a porous ceramic insulator inside the pressure tube, and stainless-steel cladding. The reactor operates at a pressure of 25 MPa with the coolant temperature rising from 350 to 625°C. Consequently, sheath and fuel centerline temperatures are significantly higher in SCWRs compared to those of the current water-cooled nuclear reactors. The main objective of this thesis is to conduct a study on specifics of the thermalhydraulics and neutronics of a pressure-tube SCWR based on an understanding of the supercritical water phenomena and their impacts on reactor design and operation. This thesis investigates the impact of several thermalhydraulic modeling parameters on fuel and cladding temperatures of a pressure-tube SCWR. The investigated thermalhydraulic modeling parameters are: 1) variable heat transfer coefficient, which is affected by thermophysical properties of supercritical water, axial heat flux, and three heat-transfer regimes: normal, improved and deteriorated; 2) thermophysical properties, which are affected by the bulk-fluid-temperature profile along the heated length and pressure drop along the fuel channel; 3) variable axial and radial heat-flux profiles of a fuel assembly (bundle string), which are affected by the neutron flux; 4) radial non-uniform heat generation inside the fuel; 5) axial and radial variable thermal conductivity of a fuel; 6) contact thermal resistance between the fuel and cladding; 7) heat loss from the coolant to the moderator, which is affected by the thermal conductivity of a ceramic insert; and 8) pressure drop of the coolant along the fuel channel. The main neutronic aspects, which have been incorporated in the neutronic model, include 1) variable coolant density along the heated length of the fuel channel, which affects neutronic properties of a lattice and, hence, the neutron flux and 2) number of energy groups, which affects the calculated channel powers.