Download or read book Techno-economic Analysis of Butanol Production Through Acetone-butanol-ethanol Fermentation written by Nawa Raj Baral and published by . This book was released on 2016 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Butanol is a next generation liquid biofuel, which can be produced through acetone-butanol-ethanol (ABE) fermentation using lignocelluloses including agricultural residues, forest residues, and energy crops. While butanol is superior to ethanol in terms of fuel properties, its commercial production is still encumbering due to low product yield, energy intensive recovery method and butanol toxicity to microbes. However, recent developments of simultaneous saccharification, fermentation and recovery techniques have potential to reduce these problems and improve butanol yield. Before commercial deployment, these recent developments on ABE fermentation technology require a thorough assessment of techno-economic feasibilities and bottlenecks. Thus, the main objective of this research was to assess the techno-economic feasibility of a biorefinery producing 113.5 million liters per year (30 million gallons per year) butanol through ABE fermentation. This study compared different components of butanol production system including feedstock supply logistics, pretreatment, fermentation and recovery, and stillage utilization methods. All the techno-economic models were developed in modeling software-SuperPro Designer. Different process and operating parameters for different components were gathered from existing literature and used as the main input to the models. Corn stover feedstock supply logistics cost ($/metric ton, dry) was estimated to be 112.1 when corn stover feedstock was assumed to be directly transported from field edge to biorefinery. This mode of feedstock transportation was found to be feasible for the biorefinery capacity considered in this study. Sulfuric acid pretreatment was found to be the most economic process with sugar production cost ($/kg) of 0.42 when compared to other most common pretreatment processes considered in this study such as steam explosion, ammonia fiber explosion, ionic liquid and biological. Based on current state of these different recovery methods, such as conventional distillation, vacuum recovery, gas stripping and liquid-liquid extraction, the lower butanol production cost ($/L) of 1.27 ($1.54/L-gasoline equivalent) was found under gas stripping recovery method. Other recovery methods require further research and development efforts to be competitive with gas stripping. Moreover, estimated stillage processing cost ($/L-butanol produced) of direct combustion system and fast pyrolysis system were found to be 0.15 and 0.17, respectively. Based on current state of technology, stillage utilization with direct combustion was found to be an economic stillage utilization method due to the lower stillage utilization cost. Integrating the most economic options discussed so far, the butanol production cost ($/L) at 95 % confidence interval was found to be 0.69-1.57 and 1.34-2.53 with and without considering byproducts’ credit, respectively. Energy conversion efficiency for the overall butanol production process was about 53.83 %. With further improvement in butanol yield of 30 g/100 g fermentable sugars, 98 wt% butanol recovery, glucose and xylose yield of 90 g/100 g initial glucan and xylan, feedstock supply cost of $64/metric ton (dry) and commercial selling value for acetone of $0.79/L, butanol production cost through ABE fermentation could be reduced to $0.47/L-butanol ($0.57/L-gasoline equivalent). This cost is very optimistic at present state of technology, which requires further research and development efforts to be economically competitive with last two years average corn ethanol cost of $0.37/L ($0.55/L-gasoline equivalent) and last 15 years average gasoline price of $0.65/L.